|
1U FAN PANEL |
|
>> CLM-882054, slider
with bracket
These server rails can be mounted in all enclosured with
two pairs of 19" mounting angles. Allows servers or other active
components to slide into the enclosures that can be screw-fixed to the
server rails via telescopic rails |
|
>> CLM-882085 Hinge Fastener
A strenthened stamping heavy plate to provide for stability hinger with heavy loads capacity. |
|
>> CLM-882026 2U Component Shelf
For mounting between the front and rear 19"
(482.6mm) mounting angles. The component shelf is infinitely
depth-adjustable from 582mm to 775mm |
|
>> CLM-882025, shelf with slider
For installation in all enclosures with 19" accommodation
and all swing frames by means of mounting flanges, 19".
|
|
| >>
CLM-882030, Drawer 1U |
| >>
CLM-882031, Drawer 2U |
| For front fixing to 19" mounting
angles. With cover and telescopic slides to accommodated assignment
lists, pro-gramming documents and small
parts. |
|
|
>>
CLM-612027-(XX), blanking panel
As an extension cover or for population as
required. |
|
>> CLM-882138-233,
Fan Set
Consists a set of fans |
|
>> CLM-124, patch panel, 24ports Cat 5E |
|
>> PP-10-R, 2U Power strip, 10 way, 10A. |
|
>> PP-8-R, 1U Power strip, 8 way, 10A. |
|
>> CLM-882199-619, cable shunting ring(5) |
|
>> CLM-882003-06,
Cage nuts M6
For securing 19" electronic equipment and
blanking plates to the 19" mounting angles. For use with metal thicknesses
from 1.8 to 2.6mm |
|
>> CLM-662009-10,
Fixing screws
For 19" electronic equipment and blanking
plates, include washers. M6 x12mm. |
.gif){kind=spacer}